1 tools woodwork

12345678910111213141516171819202122232425262728
Across
  1. 2. Cut Saw Cuts across timber grain
  2. 3. Gauge Marks two lines for mortise and tenon joints
  3. 5. Saw Cuts large boards like plywood
  4. 6. Saw Curved/internal cuts, awkward shapes
  5. 9. Saw Small/keyhole cutting
  6. 12. Punch Sinks nails below surface of wood
  7. 16. Edged Chisel Used for pairing or trenching
  8. 17. Hammer For gentle work like small pins
  9. 21. Ruler Measures short distances under 300mm
  10. 22. Tape Used for longer measurements (300mm+)
  11. 25. Drives or removes screws (flat, Philips, Pozi)
  12. 26. Shapes curved surfaces
  13. 27. Square Checks or marks 90° angles
  14. 28. Nose Pliers Grips, bends, or cuts wires
Down
  1. 1. Saw Cuts curves and dovetail waste; cuts on backstroke
  2. 2. Mallet Used with chisels or to tap joints together
  3. 4. Plane Good for end grain and chamfers
  4. 7. Pull nails or small tacks
  5. 8. Bevel Marks custom angles or slopes
  6. 10. Saw Fine cuts, especially for joints like dovetails
  7. 11. Gauge Marks chamfers
  8. 13. Hammer Hammers or removes nails
  9. 14. Saw For tenons and general sawing; stiff back
  10. 15. Chisel Cuts mortises; has ferrule and washer for strength
  11. 18. Makes small hole marks for drilling
  12. 19. Knife Scores clean lines across wood grain
  13. 20. Saw Deep frame, light curves (like puzzles)
  14. 22. Gauge Draws parallel lines to an edge
  15. 23. Hook Supports wood while sawing
  16. 24. Plane Squares and smooths timber edges
  17. 26. Plane Light planing, smaller than jack plane