10-Material Handling & Robot Safety

12345678910111213141516171819
Across
  1. 5. What should you do if the load on a forklift obscures the view ahead?
  2. 6. Load boxes on the shelf, tip back, and roll the material to the next location
  3. 7. Manually operated forklift
  4. 8. OSHA requires forklift safety inspections are done this often
  5. 10. A robot operator must train, locate emergency stops and monitor _________
  6. 13. Flat cart to transport material that must be lifted into place.
  7. 15. This is responsible for the most robot-related industrial accidents
  8. 16. This should be located on the teach pendant to terminate the robot's motion immediately
  9. 19. Type of crane used to move a hoist within a single industrial facility
Down
  1. 1. This is what you should do if rigging equipment is damaged
  2. 2. This safety device is used as a last resort to keep robots from physically moving a certain point.
  3. 3. Before operating a robot work cell automatically, all safeguards should be _______
  4. 4. Which organization requires a person who operates a forklift be trained and certified
  5. 9. Cranes can only be operated by this type of person
  6. 10. This type of robot system is in place to detect when a person is near a robot arm OR if the arm has touched a person.
  7. 11. This is used to move heavy equipment short distances
  8. 12. This safety device is put in place to stop welding robots when people get too close.
  9. 14. When an operator must be inside the robot workcell to teach points with a teach pendent, what must also be true?
  10. 17. Securing a load in order to move it
  11. 18. When is it ok to use a hoist to lift something that ways more than the rating on a hoist?