Learning Activity 7
Across
- 4. When an accident has occurred on the escalator, station staff should _____ the escalator immediately
- 5. ______ Automatic Fire Suppressant System is installed in most MRT stations
- 6. when using the hose reel to fight fire, you should stand _____ the fire and the exit (escape route)
- 9. After you rescued the trapped passengers from the lift, you should show concern for their well being and present the Public Transport _____ to the passengers
- 11. when using the hose reel to fight fire, you should be aimed at the _____ of the fire?
- 12. Station staff must provide _____ _____ to any injured passenger who fell on the escalator (hint: 2 words but write without space between the words e.g. go home is written as gohome)
- 14. Upon fire detection, the MFAP sends status indication to the _____unit and RTU
- 16. After station staff isolate the PSD, he/she must place appropriate ______ on the affected PSD
- 19. when checking a fire detection at Gas Protected Rooms or shops, you should feel the _____ for presence of heat and check for signs of smoke
- 20. The MFAP is located at the _____ staircase (street level) in underground stations
Down
- 1. When the heat detector/sprinkler system detects the presence of fire, it will send a signal to the ____ (4 Letter Word)
- 2. Heat and ________ detectors are used to detect the presence of fire
- 3. When fire alarm is activated, it will cause the lift to proceed to the level nearest to the _____ level
- 6. If the PSD are jammed and cannot be closed fully, station staff must put _____ to cordon off the doors
- 7. which module of the MFAP tells you the location of the fire?
- 8. When there is overcrowding on the platform, station staff should monitor the situation through the _____ monitors
- 10. In elevated stations, the MFAP is located at the station's _____ entrance
- 13. Before you start the lift rescue operation, station staff should use the lift ______ to calm and inform the trapped passengers that lift rescue will be performed
- 15. When all PSDs fail to open, station staff should proceed to headwall panel and turn the _____ switch to the 'OPEN' position (hint: 4 letter word e.g. MFAP)
- 17. After station staff resolves the PSD fails problem, station staff must observe the operation of the affected PSD for the next _____ (spell out the number) trains
- 18. Station staff should switch ___ the main power/isolator of the lift before performing the lift rescue