52nd National safety week
Across
- 2. Which PHA Technique would be beneficial in helping identify equipment failures in different operational states? ____
- 5. Drivers handling hazardous material should have ________, other then MSDS
- 8. Who will be the final approving authority to give equipment / process / system / facility starting clearance if no critical recommendations are pending? ___________________
- 10. What is full form of “IP” in relation with gas detectors? _________________
- 14. If there is a medium bore (25 mm hole) release of high-pressure flammable liquid (with vapor) release that ignited near source almost instantly, it is called as ___ Fire.
- 17. All hoists and lifts shall be examined by a competent person at least once in every period of _________
- 20. Toxicity is defined based on ___________________ of the Gas.
Down
- 1. Warning/ Cautionary Road Signs are in which shape? __________
- 3. If the injured person does not return to work within 48 hours of injury is called ______________.
- 4. Auto controlled fire monitored installed at ___ plant.
- 6. Permit must be _________ in case of “EMERGENCY” situation & should be revalidated after controlling the emergency by the permit approving authority.
- 7. To operate Fire extinguisher, follow the ____ method.
- 9. Red card holder must have experience of at least ___ months in chemical company.
- 11. __________ Hazard is defined as yellow color in NFPA diamond.
- 12. As per petroleum classification, Flammable liquids having flash point 23°C and above but below 65°C belongs to _________
- 13. Rupture discs provided at ________ to protect the main relief device.
- 15. Who will be responsible for preparation and handing over the equipment in safe condition? ______
- 16. _______ is used to prevent/ control free movement of lifted load.
- 18. If contractor person works at AHCl cylinder filling station area then he must have ______ type of card.
- 19. This Picture GHS symbol represent ______ hazard.