8921 Chemistry of Corrosion

1234567891011121314151617181920
Across
  1. 2. Used as an irritant to prevent zebra muscle colonization
  2. 8. Corrosion characterized by a chemical or Electro-chemical reaction that occurs uniformly over a surface
  3. 9. Gaining of electrons
  4. 11. Loss of electrons
  5. 13. A measure of the gross level of ions or dissolved ‘solids’.
  6. 15. Reduction takes place and this electrode
  7. 16. The most detrimental ion relative to environmentally assisted cracking of materials (stainless steel) used in the BWR environment
  8. 19. Red Brown Ferric Oxide (rust)
Down
  1. 1. The oxidation potential of a Standard Hydrogen Electrode
  2. 3. Generally attributed to a tenacious oxide film on the metal surface, which separates the base metal from the environment
  3. 4. ________________ induced corrosion (MIC)
  4. 5. Form of localized corrosion where the rate of attack is much greater at certain areas on the surface than others.
  5. 6. Occurs when electrochemically dissimilar metals are metallically connected and exposed to a conductive environment (electrolytic solution).
  6. 7. Corrosion which occurs within an area which is shielded from the bulk environment
  7. 10. For carbon steel systems corrosion rates will __________ when dissolved oxygen falls below 20 ppb.
  8. 12. Oxidation takes place at this electrode
  9. 14. The S in IGSCC
  10. 17. Limited to approximately 2.2 ppm in PWR reactor coolant to minimize risk of caustic attack of the zirconium alloy fuel cladding
  11. 18. Promotes transgranular stress corrosion cracking (TGSCC) of annealed stainless steel, plus pitting and crevice corrosion.
  12. 20. Corrosion that is increased when material is exposed to rapidly moving turbulent fluid