April Training: Micro

123456789101112131415161718
Across
  1. 2. _________ EU Eligible base liquids to another SPF facility, micro testing is required.
  2. 5. Non EU Eligible Finished Liquids require ______ to be collected from the storage vessel - one for Micro and one for the NIR.
  3. 6. If the Enterobacteriaceae result is greater than 10 CFU/g and less than 300 CFU/g the product's _____ will be reviewed for acceptability for shipment.
  4. 7. Samples EU Eligible Finished Liquids require seven samples to be collected - five for EU test samples, one for micro sample and one for the NIR.
  5. 10. ______ surfaces will be tested for Listeria spp.
  6. 11. Additional monitoring shall take place during ______ such as construction, roof leaks, drain backups, and excessive condensation.
  7. 13. When testing for ______ and/or yeast and mold, the swab type used will be the letheen broth sponge swab.
  8. 16. BOL's, Health Certificates, and a Certificate of Analysis will accompany ____ shipments.
  9. 17. _____ Eligible base liquids may be used without micro testing.
  10. 18. Eu eligible finished products shipping directly to the EU _____ be shipped until acceptable micro results are received.
Down
  1. 1. If a _____ tests positive, the site shall be update to routine for at least one year. If the site does not hit again in a year, the site may be changed to a non-routine site.
  2. 3. _______ (zone 1) will be tested for Enterobacteriaceae.
  3. 4. _______ and Enterobacteriaceae <300 CFU/g - if the results from the approved lab are negative for Salmonella and less than 10 CFU/g for Enterobacteriaceae, the tested lot will be released for shipment.
  4. 8. _______ surfaces (zone 2, 3, and 4) will be tested for Salmonella.
  5. 9. _____ swabs shall be collected in each area of the facilities on a regular basis utilizing the EnviroMap Program.
  6. 12. _____ shall be released according to the Release of Product Policy.
  7. 14. When testing for Salmonella and Listeria spp., the swab type used will be the ____ broth sponge swab.
  8. 15. _______ base liquids used within the facility of manufacture may be used without micro testing.