APT Unit 4.1/4.2 Vocab Crossword

123456789101112131415161718192021222324252627282930313233
Across
  1. 2. A piece of material such as wood or metal.
  2. 5. A type of drawing that shows exterior walls, all room partitions, doors, windows, stairs, bathrooms, workspaces, and any fixtures or appliances.
  3. 9. Drawings made with three axes from a horizontal line: a vertical axis, 30° axis to the right, and a 30° axis to the left.
  4. 12. A tool used to cut internal threads in a predrilled metal or plastic hole.
  5. 13. Opening in a material caused by cutting
  6. 16. The section of the drawing reserved for information about the drawing in general.
  7. 18. A stationary power saw attached to a small table that can be used to cut metal with an abrasive blade or wood with a carbide tip blade.
  8. 19. A type of drawing that indicates the internal features of an object.
  9. 22. Triangular graph paper using a series of grid lines that make a 60° grid of triangles.
  10. 24. A numeric value that gives size, form, or locations of objects on a drawing.
  11. 25. Amount of wood equal to a board one inch thick by one foot wide by one foot long, or 144 cubic inches in volume.
  12. 26. Motor-driven circular blade that is fed down into the material for cross-cutting angle cuts.
  13. 27. A sloping edge
  14. 28. A comparative relation between things in magnitude or size.
  15. 30. A tool or machine for perforating or stamping materials, driving nails, etc.
  16. 31. A list of materials with specifications needed for a project.
  17. 32. A rotary end-cutting tool that fits into the jaws of a power drill. Also known as a bit.
  18. 33. A proportion of one component to another by weight or volume.
Down
  1. 1. A stationary power tool for drilling or modifying holes of various depths.
  2. 3. A piece of tool steel shaped, tempered, and sharpened to cut mild tool steel when driven by a hammer.
  3. 4. A piece of hard material with two principle faces meeting in a sharply acute angle, for raising, holding, or splitting objects by applying a pounding or driving force.
  4. 6. Grooves of an even shape and taper that wrap continuously around a shank or hole.
  5. 7. A type of drawing where all surfaces are projected onto flat planes that generally are 90° angles to one another.
  6. 8. A very hard mixture of heated and pressurized carbide and various heavy metals, especially tungsten carbide, used for cutting edges and dies.
  7. 10. A drill bit that has flat cutting lips at the outside edges and a central projecting point used to guide the bit into wood, plastic, or composition materials.
  8. 11. A drawing that shows three views in one.
  9. 14. A drill bit used to bore holes in plaster, concrete, stone, brick, and other types of masonry.
  10. 15. The size of a plan compared to that of the object it represents.
  11. 17. In a straight line.
  12. 20. Any material used for grinding, polishing, etc., such as emery, pumice, or sandpaper.
  13. 21. A line used with dimensions to show size and location.
  14. 23. The size of material as used in the name for trade and building purposes.
  15. 29. A general-purpose bit used to drill holes up to one-inch in diameter in wood or light gauge metal.
  16. 32. A tool with an internal thread similar to the thread in a nut used to cut external threads on bolts and on similar round metal or plastic.