Construction Drawings

1234567891011121314151617181920212223242526272829303132333435363738394041424344
Across
  1. 4. A high-strength vertical structural member
  2. 6. ________ lines identify the location of a specific part of the drawing – used with words, abbreviations, symbols, or keynotes
  3. 8. are traditionally printed drawings with white lines on a blue background
  4. 14. _______ drawings display items as the eye sees them
  5. 15. Block is placed on the drawing to record any changes in the drawing and includes a brief description of the change, the date, and who made the change
  6. 17. This acronym is a form to fill out if there is a discrepancy in the plans
  7. 18. ________ of lines describes all the different types of lines used in a drawing
  8. 25. ________ drawings provide information on the Heating, Ventilation and Air Conditioning in a building (acronym)
  9. 26. _______ drawings are used to illustrate the design of a project
  10. 27. Steel members that are similar in shape to the letter C
  11. 29. ________ lines identify part of a structure that is not visible on the drawing
  12. 30. The relationship of the size or distance of an item on a drawing compared to the real life size of the time when an items size is reduced to fit on a particular sheet size
  13. 34. ________ lines show where an object has been broken off to save space on the drawing
  14. 35. ________ drawings are generally considered to be the drawings of steel, wood, concrete and other building materials
  15. 36. A high-strength horizontal load-bearing member
  16. 37. ________ lines show points of equal elevation
  17. 40. ________ drawings show layout for the supply of hot and cold water, and for the sewage disposal system
  18. 42. ________ drawings provide the necessary information on the location, alignment, and elevation of a structure and its principal parts in relation to the ground at the site
  19. 43. The connection place where steel members are connected to other steel members
  20. 44. is normally placed in the lower right corner of the drawing and usually include the company logo, project title, and the date the drawing was created (2 words)
Down
  1. 1. ________ lines show the measured centre of and object
  2. 2. ________ tell what material is required for certain parts of the project
  3. 3. _____ _____ lines are used to indicate where an imaginary cut is made through the object (2 words)
  4. 5. Allows a specific point on a drawing to be referenced or found
  5. 7. ________ lines establish the sizes of parts if a structure – may end in arrows, dots, or slashes at a termination line drawn perpendicular to the dimension line
  6. 9. Steel member that are cut from a standard I-shape thus forming two T-Shapes
  7. 10. ________ maps describe in detail the local features of the earth’s surface
  8. 11. ________ drawings include information about motors. pumps and piping systems and piping equipment
  9. 12. A framework consisting of two horizontal members joined together by a number of veritical and/or inclined members to form a series of triangles
  10. 13. Steel members that are identified by nominal depth in inches, and weight per foot (2 words)
  11. 16. A window ________ lists all the window types, frame sizes, frame finish and glazing information for all the windows in a building
  12. 19. ________ drawings show locations of the meter, distribution panel, switchgear, convenience outlets and special outlets
  13. 20. ________ lines identify the object of primary interest or the closest object
  14. 21. is a visual explanation of the symbols placed on a drawing
  15. 22. Steel members that are similar in shape to the letter L
  16. 23. List (also called Bill of Materials) A list of the materials that are required to build an item
  17. 24. ________ lines show land boundaries
  18. 28. The actual measurement of distances, elevations and directions on the earth’s surface
  19. 31. drawings are architectural or working drawings used to represent a structure or system
  20. 32. ________ drawings are enlarged views of some special features of a building
  21. 33. ________ drawings show an object from multiple different views
  22. 38. are used to help reduce clutter and simplify drawings, along with a table to explain the abbreviations
  23. 39. Statements that are provided to the general contractors to define the quality of work to be done and the materials to be used
  24. 41. ________ drawings are the vertical views of a building, especially the outside walls