Electrical Safety MOD 9

123456789101112131415161718192021222324252627282930313233343536373839
Across
  1. 2. The most life threatening hazards on a construction site typically include all of the following except?
  2. 6. What color tags are on the rubber gloves with the highest level of protection?
  3. 7. OSHA CFR 1910 is the standard for.
  4. 12. Under strict safety guidelines, which of the following should be used to capacitors before working on de-energized circuits?
  5. 15. Which of the following applies to vapor lamps Disposal of these materials is regulated by the Environmental Protection Agency.
  6. 16. What must happen before any work may be performed in a confined space ____________ of hazards?
  7. 17. Which factor determines the outcome of an electrical shock The amount of____________.
  8. 18. The best way to protect yourself from solvent hazards is to Read and follow all instructions on the products ____________ BOOK.
  9. 20. A PFAS anchorage point for a 6-foot lanyard must be able to hold _______.
  10. 21. A life threatening condition of the heart in which the muscle fibers contract irregularly is called?
  11. 22. What is the proper distance from the feet of a straight ladder to the wall one-fourth the __________ of the ladder ?
  12. 25. When a guardrail cannot be attached to a building, a solution may be to install a controlled ____________
  13. 28. A live-dead-live test is conducted in order to Verify that a circuit is
  14. 29. Chemicals known as _____ are often used to cool certain types of large transformers and capacitors.
  15. 30. What happens to the permits used to enter a confined space they are recorded in the ______________ at the end of shift and retained for a year?
  16. 32. Which of the following applies in a LOTO procedure__________ by every authorized employee involved in the work.
  17. 33. NEC section 590.6A states that the receptacle outlets requiring GF include the 125V, single-phase, 15A, 20A, and.
  18. 34. An important use of a hot stick is to?
  19. 35. Which of these statements correctly describes a double insulated power tool It can safely be used in place of a_____________?
  20. 36. IT is safe to assume that asbestos may be found in any facility constructed before _______.
  21. 37. the OSHA lockout/tagout rule protects workers from ____________ to hazardous energy sources.
  22. 38. What are the minimum and maximum distances (in inches) that a scaffold plank can extend beyond its end support?
  23. 39. Class 0 rubber gloves are used when working with voltages less than?
Down
  1. 1. NFPA 70E provides practical guidance in.
  2. 3. For safety, assume that any facility constructed before 1980 contains.
  3. 4. A _______ has a 3 prong plug at the end of its power cord or some other means to ensure that stray current travels to ground without passing through the body of the operator.
  4. 5. Tools that have a case made of nonconducting material and have been constructed so that the case is insulated from electrical energy are called?
  5. 8. Are responsible for most electrocution deaths due to the frequency of contact
  6. 9. The normal beating of a hear can be upset by an electrical current as small as.
  7. 10. A ________ will de-energize a circuit or a portion of it if the current to ground exceeds some predetermined value
  8. 11. At the end of the shift, a confined space entry permit must be.
  9. 13. Which of the following battery byproducts can be explosive when mixed with air
  10. 14. Minimum installation requirements for electrical equipment
  11. 19. Class 1 rubber gloves have a maximum AC use voltage of.
  12. 23. Which of the following should have side rails that extend 36 inches above the top support point?
  13. 24. If a person's heart begins to fibrillate due to an electrical shock, the solution is to have a qualified person use emergency _______ equipment.
  14. 26. gloves must be inspected by the user.BeforeEachUse 30A
  15. 27. OSHA requires you to be evaluated by a physician to ensure that you are physically fit to use which of the following types of protective equipment?
  16. 31. OSHA safety standards for the construction industry are contained in.
  17. 38. Which of the following voltages is considered low voltage __________ or less.