Elevated Work & Fall Prevention

3. Line line attached to a tool or object so a worker can pull it up after climbing a ladder or scaffold
5. standard that requires contractors to educate employees about hazardous chemicals on the jobsite and how to work with them safely
6. A rule stating that platforms or work surfaces with unprotected sides or edges that are 6ft or higher than the ground or level below it require fall protection
11. An unplanned event that results in damage to tools, materials, or equipment, but no personal injuries
13. top-level, horizontal boards required on all open sides of scaffolds and platforms
14. Intended Load the total weight of all people, equipment, tools, materials, and loads that a ladder can hold at one time
17. Elevated platforms for workers and materials
18. having pieces of material 2 inches thick or greater and 6in wide or greater used as flooring, decking, or scaffold decks

1. An unplanned event that does not result in personal injury but may result in property damage or is worthy of recording
2. braces (either metal or wood) placed diagonally from the bottom of one rail to the top of another rail that add support to a structure
4. Enclosed, fenced, covered, or otherwise protected to prevent dangerous contact
7. Any man-made cuts, cavities, trenches, or depressions in an earth surface, formed by removing earth
8. Vertical barriers at floor level attached along exposed edges of a platform, runway, or ramp to prevent materials and people from falling
9. An unplanned event in which no one was injured and no property damaged occurred, but either could have happened
10. Short sections of rope or strap, one end of which is attached to a worker's safety harness and the other to a strong anchor point above the work area
12. An action someone takes that is performed unsafely - is not proper procedure.
15. mid-level, horizontal board placed between the toeboard and top rail
16. An unplanned event that results in personal injury and/or property damage