Forging For Answers

123456789
Across
  1. 3. Deviation from edge straightness usually referring to the greatest deviation of side edge from a straight line.
  2. 4. Lower or bottom section of a mold or pattern.
  3. 6. Product whose width is below the customer's finished width tolerance.
  4. 7. A gas that forms approximately 79% by volume or 77% by weight of the atmosphere.
  5. 8. One of several types of small metal objects designed to fit mating slots in a shaft and the hub of a gear or pulley to provide a positive drive between them.
  6. 9. An object at or near finished shape obtained by solidification of a substance in a mold.
Down
  1. 1. Mechanically formed by tension through or in a die.
  2. 2. A heat-resistant material, usually nonmetallic, which is used for furnace linings and such.
  3. 5. Reducing the cross-sectional area of metal stock, or otherwise shaping metal products, through the use of rotating rolls.
  4. 7. The first structurally stable particle capable of initiating recrystallization of a phase or the growth of a new phase, and separated form the matrix by an interface.