fusion 360 defnitions

1. sweeps a sketch profile or planar face around a selected axis
3. creates a copy of selected faces, bodies, features, or components, mirrored across a plane
5. creates a projected orthogonal and isometric views of the design
7. Position components relative to one another and defines the relative motion. Components maintain their current position.
9. creates a full, half, offset, or aligned section view through the design
11. slides a component along a single axis
14. rotates and slides a component on two different axes
15. creates a transitional shape between two or more sketch profiles or planar faces hole creates a hole based on user-specified values and selections thread add internal or external threads to cylindrical geometry. threads can be cosmetic or modeled on the geometry
16. creates a solid coil
18. select a rounded edge, such as holes or fillets. A center mark including a PCD is created
19. creates a circular detail view of a portion of the design
21. adds thickness to surface faces to create a solid boundary fill. creates, joins or removes volumes using bounding volumes formed by tool selections
22. creates a solid torus
23. rotates and slides a component on a single axis
24. creates a new internal or external component in the assembly

2. adds depth to open or closed sketch profiles or faces
4. rotates a component around the joint origin
6. Locks components together and removes all degrees of freedom
8. Position components relative to each other in an assembly, then defines the relative motion between them
10. select a rounded edge, such as a fillet, hole, sphere, or cylinder
12. revolves a sketch profile or planar face around a selected axis
13. creates a view of the referenced design
14. rotates a component around one axis normal to a plane and slides it along two axes parallel to the plane
17. rotates a component around all three axes on a gimbal system
20. select two Straight edges. The centerline is created between them