General Shop Safety Guidelines

123456789101112131415161718192021222324252627
Across
  1. 2. Large, long or heavy materials should be moved and ___ by at least two people.
  2. 7. Before using any power equipment you must obtain _____ from your instructor.
  3. 10. Only the ___ of a machine is allowed to turn on or off the machine they are using.
  4. 14. If you have not passed a machine specific safety test with a score of 100% you are not ___ to use that machine.
  5. 15. Only ____ person is allowed to be inside the operator or safety zone at one time unless the instructor needs to step in to help the operator.
  6. 19. When you see a damaged tool or other unsafe condition in the shop you should ____ your instructor immediately.
  7. 21. It is necessary to wear ______ around compressed air, air hoses and air nozzles because compressed air is dangerous to your eyes.
  8. 22. Students should use a vice or clamps to ___ small projects that are too difficult or dangerous to hold by hand.
  9. 25. When using a sharp hand tool (like a chisel) you should cut ___ from your body and hands.
  10. 26. If you see items that might cause someone to slip or fall you should place the item in a ___ place or ask your instructor for help.
  11. 27. You must immediately report all ______ no matter how small to your instructor.
Down
  1. 1. Always use a ____ to clean debris and scraps from a table or machine.
  2. 3. Unnecessary movements or ___ caused by students during lab time could easily distract a machine operator and cause an accident.
  3. 4. If you are not sure how to ___ a machine or hand tool you should ask the instructor to review it with you.
  4. 5. All projects and activities must be ___ by the instructor before beginning work on the project.
  5. 6. Rags containing combustible chemicals (chemicals that can catch fire) must be disposed of in a approved ____ metal container.
  6. 8. The operator zone or _____ which is shown with yellow marking on the floor around each machine refers to the area where the machine operator can stand.
  7. 9. If you notice any ___ or damaged tools, instruments, or equipment, or you think a machine is not working properly, you should not use it and notify the instructor immediately.
  8. 11. In case of an emergency you should immediately ___ your machine and follow the teachers instructions.
  9. 12. ____ Toed shoes (sandals, flip flops etc)are not acceptable to wear in the shop.
  10. 13. You should not use compressed ___ to clean off your hair, skin or clothing.
  11. 16. Safety Guards on machines are for our protection but if you find one that is ____ or is broken you should not used that machine in any circumstance.
  12. 17. You must wear approved _______ at all times in the shop area.secure, Before entering the sho you should always take safety steps such as;_____ loose clothing,remove loose jewelry,roll up long sleeves, and tuck in or ties back long hair.
  13. 18. You should never ______ from a machine while it is powered on or still coasting to a stop.
  14. 20. "Horseplay" in the classroom, lab or shop is ___ at all times in the shop.
  15. 23. ___ tools should be used in the shop because they are safer than dull tools.
  16. 24. It is not okay to ___ to another student or instructor while they are operating a machine.