IED Activity 1.3.1 Vocab

2. A hole that has the same diameter along its length and passes completely through the object.
4. View used to show interior detail that is too complicated to be shown clearly with hidden lines
7. A manufacturing technology for the mass-production of plastic parts in which polymer granules are melted and then injected under pressure into a mold where the liquid plastic cools and solidifies.
10. A projected view that shows a specific portion of a view at an enlarged scale
12. A group of parts that are connected and form one unit.
13. Template for a sheet and gives general information about the drawing.
14. Describes something, such as circles, that have a common center.
15. A measuring instrument having two adjustable jaws typically used to measure diameter or thickness.

1. A strategy in which geometry is defined in such a way that changes produce desired, predictable results.
3. A limit to a design process; A limitation or restriction.
5. To become progressively smaller toward one end.
6. In geometry, a plane (two-dimensional) figure that is described by straight line segments connected to form a closed loop.
8. In measurement, one-half of the smallest unit of measure (increment) on a device.
9. To standardize (something, such as a measuring instrument) by determining the deviation from a standard in order to correct errors.
11. A hole that is drilled to a specific depth and does not pass completely through the object.
16. An object that provides information about a feature, such as the length of a wall, the diameter of a fastener, or a detail callout.