Jetbridge Operation Safety

123456789101112131415161718192021222324
Across
  1. 2. The jetbridge _________ is responsible for communicating with Ramp Agents in order to ensure that all equipment has been disconnected from the aircraft and properly stowed prior to moving the jetbridge
  2. 7. Always wear hearing _____________ when an aircraft is arriving at the gate
  3. 9. This part of a jetbridge must be outside the safety zone for aircraft arrival
  4. 11. The distance between should not touch but should not be more than 2"
  5. 13. Pooling water, snow, ice are examples
  6. 17. The nose wheels must be ________ before the jetbridge may be moved to the AC
  7. 18. This must be reported to a Leader immediately
  8. 19. An Exterior and Interior ____________ must be completed before moving the jetbridge
  9. 21. The Ramp must hold their signal until jetbridge movement has ________
  10. 22. Moveable path to the Aircraft
  11. 24. The jetbridge must be clear of the safety ____ before arrival and departure
Down
  1. 1. If unsure of what to do, who do you call?
  2. 3. This signal indicates all equipment has been disconnected and properly stowed, the jetbridge is clear, and movement may begin
  3. 4. Jetbridge Operators and Ramp Agents must ________ before removing the jetbridge from the Aircraft
  4. 5. ___ holds our policies and procedures
  5. 6. ____________ awareness is required at all times
  6. 8. Ramp Agents use these to signal in low visibilty conditions
  7. 10. Operations Agents are responsible for controlling ______ to the aircraft at all times
  8. 12. This wheel must touch the AC
  9. 14. _____ the jetbridge to allow full opening of the aircraft door
  10. 15. Arm or wand position that indicates an emergency stop
  11. 16. This must be lowered after the jetbridge is in position
  12. 17. The area around the jetbridge must be _____ before placing the jetbridge in motion
  13. 20. First at MDW
  14. 23. Short for Remain Over Night