Jointer Safety

3. The function is to straighten edges so do not use it as a ______________
8. Never adjust the jointer while the cutterhead is ___________
9. Turn off the power and allow the jointer to ___________before leaving
10. Check to see that all ____________ are tightened securely before using the jointer
11. Check the stock carefully to ensure it is free of finishes knots and __________
12. Never joint stock less than ___________ inches long
14. Always ___________the power source when servicing the jointer
17. Maximum cut depth of one thirty second inch is allowed on ___________
20. Secure permission from the ___________ before operating the jointer
22. Use this safety device to protect yourself from the blade at all possible times
23. Use a try square to determine if the _____________is perpendicular to the table
25. Do not engage in ______________ or talk to others while operating

1. Use an ___________ when jointing long pieces of stock
2. Feed stock through the jointer so it will cut with the _____________
4. Dull knives are more likely to cause the dangerous action of ______________
5. The infeed and outfeed tables are __________ adjusted to the same height
6. When using the jointer, you should complete the joint in as many __________ as needed
7. Wear industrial quality eye ___________ while using the machine
13. Always use an approved push stick or ___________ for hand safety
15. Adjust the ____________ table to achieve the desired cutting depth
16. Keep the floor area __________ and free of scrap material and sawdust
18. Maximum cut depth of one sixteenth inch is allowed on ___________
19. Maintain _____________ when operating the jointer so you do not overreach
21. Push stock with the ____________ hand while holding it against the fence with the left
24. Always stand to the side and out of line of the ____________ knives