June Safety Month

1234567891011121314151617181920
Across
  1. 2. ____ Should be secured to prevent them from falling over
  2. 4. ____ vests, jackets, shirts, or bump caps are required by anyone in Receiving, Scalehouse, or Shipping
  3. 7. All exits, aisles, and passages should be maintained in a clear ___ foot aisle
  4. 9. Storage racks shall be ____ and firmly affixed to the floor
  5. 12. Every ___ of work in the dryer tower must include a 15-minute break in temperatures above 80 degree F.
  6. 15. Climbing on storage racks and mezzanine railing is ____
  7. 16. Forklifts must sound their horn before going through ____ or around blind corners
  8. 17. When a truck well is empty the dock door must be ____
  9. 20. ___ protection shall be metal detectable, corded, and worn in processing areas unless noise is below 85 Db.
Down
  1. 1. A confined space ____ should be completed prior to entry into any confined space to ensure all hazards have been eliminated
  2. 3. All incidents, close calls, or property damage must be reported ____ to your supervisor during your shift
  3. 5. A pre-shift ____ must be performed and documented before operating a forklift
  4. 6. Safety glasses and ____ are required in all warehouse and processing areas with the exception of bathrooms, locker rooms, control rooms and office spaces
  5. 8. ____ must be sturdy, slip resistant with safety toes, and deemed appropriate and purchased through a company approved vendor
  6. 10. ___ points of contact is required when ascending, descending, or working from a ladder
  7. 11. Only trained and ____ employees are allowed to perform maintenance or service work on equipment or machinery
  8. 13. ____ should be wound up and hung on the reel when not in use.
  9. 14. Safety goggles, face shield, and ____ shall be worn when transferring chemicals
  10. 18. Employees should drink ___ ounces of water every 20 minutes to prevent dehydration
  11. 19. The general housekeeping should be maintained in a clean and ____ condition