Networking

3. Occurs when tow devices that share the same media segment transmit at the same time
5. What firewalls use to manage incoming or ongoing traffic
9. A distance vector routing protocol used for routing within an autonomous system that uses hop count as the metric
11. Installed on a single computer in a network and is less expensive and easier to use but they don't offer the same level of protection or customization
12. A relative number that represents the cost for using the route
13. Can filter only on source hostname or host IP address and should be placed as close to the destination as possible

1. Occurs when two devices are using different duplex settings
2. Number of routers between the current router and the destination network
4. An advanced distance vector protocol that is an exterior gateway protocol used for routing between autonomous systems
6. A buffer network (or subnet that sits between the private network and an untrusted network
7. Makes decisions about which traffic to allow based on virtual sessions, operates at OSI Layer 5, and verifies that packets are properly sequenced
8. A value assigned to each route that identifies the distance or cost to the destination network
10. Uses the IP address class and the default subnet mask to identify network addresses that do not support CIDR or VLSM