Period 1 Technology Mid-Term

1234567891011121314151617181920
Across
  1. 4. This tool provided another option for cutting your metal box to size and shape
  2. 5. This is the smallest unit of measurement we use in this course
  3. 8. This style drawing represents multiple surfaces in at least 3 different views or projections
  4. 10. This tool is required for marking material throughout the course
  5. 11. Once the sheet was laid out, this tool was used to cut the metal box to shape
  6. 15. You can remember this style of sketching as it resembles a 3D representation of an object
  7. 17. It was necessary to use this tool to tightly wrap around both square and round posts when making the plant hanger
  8. 18. After cutting your metal box template, this tool was used to bend the metal along a straight edge
  9. 20. These small metal fastners secured the metal box sides together
Down
  1. 1. If your plant hanger fell too deep in the water, a pair of these fished it out
  2. 2. This is what you create before you begin a sketching assignment
  3. 3. These features of the metal box were bent first and are important to prevent accidental cuts
  4. 6. These features are found on metal brakes and hacksaws
  5. 7. Together, these two parts make a plant hanger
  6. 9. This tool was used to cut the metal for the plant hanger
  7. 12. To prevent the drill from slipping when creating holes, this tool was used to mark and start
  8. 13. After lighting acetylene, adding this gas makes the flame 10 times hotter
  9. 14. This tool was used to smooth the rough edges left when cutting or brasing metal
  10. 16. This tool should always be used when creating technical drawings
  11. 19. We used these to bend and shape the metal bars to create a plant hanger