Receiver Assembly

12345678
Across
  1. 5. Micrometer sight adjustable for windage and elevation. It is easily attached to a metal rail located on the receiver assembly cover. This rail allows for adjustment of the sight forward or backward to maintain proper eye relief. The sight is attached using a small flat-blade screwdriver
  2. 6. Two screws that hold the receiver assembly and pump assembly to the valve body
  3. 7. Plastic lever used to seal the chamber when firing occurs. The bolt also draws back the hammer when cocking the cadet air rifle
  4. 8. A spring used to provide tension for the operation of the bolt
Down
  1. 1. Plastic clip that holds a maximum of five pellets. It is advanced by the clip actuator and is used to place pellets in the chamber when the single-pellet adaptor is not used
  2. 2. Plastic lever used to move the bolt forward and backward
  3. 3. This metal housing holds the receiver in place on the cadet air rifle
  4. 4. Adaptor Plastic insert used to place a pellet into the breech before the bolt slides it forward into the chamber