Safety Guidelines Puzzle MD

12345678910111213141516171819202122232425
Across
  1. 3. Do not touch any equipment, supplies, or other materials in the room without __ from the teacher.This includes other student projects or lab materials set out for the day’s use.
  2. 4. These should not be in the work area and must be stored safely under the tables. They are a tripping and fire hazard in a STEM classroom.
  3. 6. Mark ______ to be cut with pencil before using the Exacto or Utility knife, or specialized shears/scissors/snips.
  4. 9. Always start with the ______ magnification when viewing a slide.
  5. 11. Always cut _____ from the body.
  6. 12. Keep your ______ as far away from the blade as possible, AND be sure to maintain a safe grasp on the material being cut.
  7. 13. Follow teacher instructions when you _______ any chemicals or chemical waste.
  8. 16. Use ______ in the designated area of the classroom/lab. (TWO WORDS)
  9. 17. On these, special paper should be used to clean the lenses.
  10. 20. Do not touch the ______ of the glue gun, even to see if it hot enough to use or completely cooled off. (TWO WORDS)
  11. 22. Must be used when working with chemicals. (two words)
  12. 24. At the end of EVERY class, you are expected to _______ your area and put away all equipment before being dismissed.
  13. 25. These have a special, separate container that is used to 'throw them away'
Down
  1. 1. Know where the _____ Safety Data Sheets (MSDS or SDS) are located.
  2. 2. _____ on what you are doing while handling a craft/utility knife OR any specialty shears/snips.
  3. 5. Watch for ____ on tools and while building with microcontroller systems to avoid injuries. (two words)
  4. 7. Use _____ supplies for only the intended surfaces. If you are unsure about whether a substance can be used to clean an item, ask before using.
  5. 8. Use a tool or piece of equipment only for its specific _____ and use the correct tool for the job.
  6. 10. Keep all food and drinks away from _____ equipment.
  7. 14. Goggles and _______ must be used when working with bacteria.
  8. 15. Always place a piece of scrap material _____what is being glued or painted.
  9. 18. Carry all tools with the points _____ and in a manner that does not pose a danger to others around you.
  10. 19. Report any accident, injury, broken equipment, or any hazardous condition, regardless of how minor, to the ____ immediately.
  11. 21. Perform only ______ activities and projects using the equipment provided.
  12. 23. Don’t leave specialized shears or cutters _____. When done, always close and latch the safety if available.