Scout Crossword Puzzle

12345678910111213141516171819202122232425262728293031323334353637383940414243
Across
  1. 2. If your bot is not responding to your joystick, one simple cause could be that the bumper button is not held down by a ____________.
  2. 6. No operations personnel are allowed inside a __________ Dispenser.
  3. 9. QR _________ for each joystick can be found on the “Seattle_joystick-QR-codes” slack channel or “DSE4 Joystick QR Codes” Google Drive folder.
  4. 12. The state in the Mission Control App showing that Scout has reached a delivery location is called _________
  5. 16. Once a bot is paused and you hit the “A” button on the joystick, the color of lights on the back of the bot will be __________.
  6. 17. A _________ cannot be paired via QR code if the robot is in Dispenser mode.
  7. 23. What does CX mean?
  8. 25. A ___________ must be cancelled before placing bots into dispenser/van.
  9. 27. If an ambassador feels threatened by anything in the field; interaction, dog, customer, community member, they should call a Code 3 _________.
  10. 28. After releasing a bot from a Hardstop state it will _____________, when the bot rocks violently back and forth to ‘test’ the brakes.
  11. 30. If Scout collides with person, car, or animal, but it is not life threatening, or an ambassador has experienced a non-life threatening incident, it is a Code ______.
  12. 31. Scout may travel autonomously into a street to navigate around objects, supposed the speed limit on that street is under _________ MPH.
  13. 34. What is the nickname of the button that should be pushed to release local?
  14. 35. What part of the robot must be at over 40% level to go on mission?
  15. 36. Never unplug an SSD when the blue light is ____________.
  16. 37. NEVER troubleshoot a bot in a ________.
  17. 38. Every day Scout generates a massive amount of data. After it’s processed on the bots after returning from expedition, we upload this data into our Dispenser onto a removable _______.
  18. 40. The ______ App is the application Ambassadors use to finish a delivery while in field.
  19. 41. If a bot (or van) collides with a person or animal, and it is life-threatening, or, an ambassador has experienced a life-threatening incident, it is a Code _____ and you must call 9-1-1.
  20. 42. “Waiting_For_Move_Health will stay in that state for at most 3 minutes. If it passes its internal checks before 3 minutes, the bot will transition to “Movement_________.”
  21. 43. Hitting the “Dpad-Right” button on your joystick will will open the __________.
Down
  1. 1. A robot in a ____________ state in the Mission Control APP is when Scout cannot move autonomously or manually.
  2. 3. What color is the rear lights on the robot when it is in a Paused State?
  3. 4. A ____________ State in the Mission Control App indicates that Scout has received a mission and is ready to begin autonomous navigation of the route.
  4. 5. Create a _______ _________ for any physical issue on a bot (broken flag, brake, lights, etc.).
  5. 7. The state in the Mission Control App indicating that Scout sub-systems are operating successfully.
  6. 8. Drivers, before entering a vehicle, check the exterior for any _____________.
  7. 10. Power off a bot in the dispenser (Leave BMS Switch on) if it is not uploading data, but only needs ______________.
  8. 11. Create a _____ for any software issue, multiple power cycles, bot is stuck in dispenser mode, bot can’t reach Idle.
  9. 12. Set all bots to __________ Mode before powering down a bot.
  10. 13. Create a _______ for any dispenser issue such as bots with high SSDs or low battery.
  11. 14. FMC stands for Fleet Management ________.
  12. 15. DVIR stands for Delivery Vehicle ____________ Report.
  13. 18. The “J” in “J-Stop” stands for ____________.
  14. 19. RA Stands for ___________ Assist.
  15. 20. The location in a zone where you start and end your missions.
  16. 21. If the bot brakes are flipped up in the unlocked position when it is booted, it will be in Fatal _________ and will need to be power cycled.
  17. 22. There are three computers or hosts in the robot, and each one has its own USB port. They are Primary, Secondary, and ______________ .
  18. 24. If a sidewalk curb has a 90-degree drop, it is a hard curb and a ________ is necessary to prevent damage to the bot’s wheels, chassis, or prongs.
  19. 26. Press right bumper on the joystick to release bot from pause state. The color of lights on the back of the bot will change from blue to _______ if the bot is Idle, no lights if bot goes autonomous.
  20. 29. BMS Stands for Battery _________ Switch.
  21. 32. Once the bot reaches its origin point, and is put in Idle, upon releasing local, your bot will go into
  22. 33. Once robot transitions to “Movement Ready”y, the handler band ighting color will turn solid _________. This indicates the robot is in a driveable state.
  23. 34. Mission Control is also called The _________ App.
  24. 39. What mode does the bot have to be to be put on a mission?