Sec 4 SET Theory Revision

123456789101112131415161718
Across
  1. 2. In the ____ topology, data is transmitted along the BUS cable.
  2. 4. The ____'s Law states that V = R x I.
  3. 7. When the number of resistors in a series circuit increases, the total resistance will ____.
  4. 9. When a person comes into contact with a conductor that is live under normal conditions, it is a/an ____ contact.
  5. 11. ____ shows how the computers in the network are inter-connected.
  6. 12. The resistance will be ____ hundred ohms if the applied voltage is 200 V and the current flowing through the resistor is 0.5 A.
  7. 13. the ____ control can perform multiple switching and dimming actions with a single command.
  8. 14. The ____ current flows in both directions with current changing all the time.
  9. 15. Controllers are factory-programmed with a ____ ID.
  10. 17. A device must be ____ in the Z-Wave network before it can be controlled via Z-Wave.
  11. 18. Low noise ____ is one of the disadvantages of using Twisted Pair.
Down
  1. 1. The severity of an electric shock is determined by ____ flow in the circuit.
  2. 3. In the Z-wave network, a ____ is a device that controls other devices.
  3. 5. ____ standard is the machine language.
  4. 6. ____ means that the devices can work without direct control by a person.
  5. 8. 50 volts is equal to 0.05 ____ volts.
  6. 10. ____ is used to act quickly to prevent human electrocution when the thin wire within melts and open the circuit.
  7. 12. ____ recognition technology ia a security feature that is becoming widespread.
  8. 16. The dimming feature is also known as the ____ control.