Shop Information

2. ____ nuts have a nylon insert into it's threads that provides enough interference to prevent the nut from loosening.
4. A ____ saw is used for cutting metals.
9. ____ make it possible to disassemble a component by hand.
11. A ____ hammer has a rounded end that can be used for shaping metal and making gaskets.
13. A ____ is narrow and is used for driving small fasteners and making layout marks.
14. A ____ nut uses a cotter pin to lock it into place.
16. ____ are used to prevent end-movement of cylindrical parts in bores or parts mounted on shafts.
17. A ____ measures in fractions of an inch as low as 1/32.
20. A ____ is used to determine weather a surface is horizontal (level) or vertical (plumb).
21. ____ are metal parts that can be used to assemble parts.
22. A ____ is used for striking an object where it is important that the hammer itself not come in direct contact with the work.

1. A ____ saw is normally used for making fine cuts and has 14-16 teeth per inch.
2. Pliers that are used for cutting and bending heavy gauged wire.
3. The two major welding processes are oxyacetylene welding and ____ welding.
5. A ____ saw is used to make fine curving cuts.
6. ____ is a process that involves melting the base metal of the objects to be joined.
7. ____ are used to measure the distance between two sides of an object.
8. Higher percentages of ____ will result in lower melting points when soldering.
10. ____ is a process that joins metals by bonding a metal alloy to their surfaces.
12. A ____ is used to measure or lay out angles.
15. A ____ has internal threads.
18. A ____ has external threads.
19. A ____ saw cuts across the grain of wood.
23. A ____ saw cuts with the grain of wood and has teeth shaped like chisels.