Table Saw Safety

12345678910111213141516171819
Across
  1. 2. Never stand in the _ zone and make sure no bystanders are behind the saw before turning it on.
  2. 7. Never remove _ while the saw is running or while the blade is still moving.
  3. 8. The miter gauge is always used to make _ cuts.
  4. 9. Ask your instructor for help when sawing boards longer than _ feet.
  5. 11. The blade should never be higher than _ of an inch above the workpiece.
  6. 13. A push stick must be used for ripping boards less than _ inches wide.
  7. 14. The guard and riving knife may _ be removed when operating the table saw.
  8. 17. Do not cut wet or _ boards on the table saw.
  9. 18. Never _ a board into the blade and do not back a board out of a cut.
  10. 19. Never _ cut on the table saw.
Down
  1. 1. The fence is always used to make _ cuts.
  2. 3. Keep the saw _ and free of sawdust and scrap wood.
  3. 4. Only the _ may turn on the table saw
  4. 5. Ask your _ if you are unsure a sawing procedure is safe.
  5. 6. Always ask your instructor for permission to use the table saw before using it. Be prepared to show and/or explain what you will be cutting.
  6. 7. Do not use the miter gauge and the fence at the _ time.
  7. 10. Always make adjustments when the power is _ and the saw in unplugged.
  8. 12. _ must be kept out of the guard
  9. 15. All boards must have a straight _ to be cut on the table saw. This _ must go against the fence.
  10. 16. Boards less than _ inches long and/or 1 1/2 inches wide may not be cut on the table saw.