Welding

123456789101112131415161718192021222324252627282930313233343536
Across
  1. 5. Tip Cutting,allows the tip to be in contact with the work piece
  2. 7. material which is not blown out of the cut area and resolidifies
  3. 8. Arc,non-transferred arc which does not make contact with the base metal
  4. 10. to an electrically neutral location
  5. 12. Clamp, clamp which fastens the work lead to the work
  6. 13. in response to a policy
  7. 15. Ventilation,use of mechanical means to facilitate air movement
  8. 16. type of edge preparation
  9. 19. Acts,any act which differs from normal, safe actions and could result in an accident
  10. 21. Arc Cutting, process of cutting metal by using a torch which blows gas out of a nozzle
  11. 23. Safety,condition of being safe from risk or danger in the workplace
  12. 24. of either negative or positive in relation to electrical currents
  13. 27. management of a location in terms of neatness and cleanliness
  14. 30. Cutting,separates the tip from the work piece and requires the distance between
  15. 31. Conditions,any condition which differs from normal, safe conditions
  16. 32. Circuit Voltage,voltage between the terminals of the welding source when no current is flowing
  17. 33. the flow of electricity; equivalent to current or heat
  18. 35. energy available to move a charge along a path
  19. 36. procedure used to ensure equipment is not used while under repair
Down
  1. 1. at the end of a torch tip which allows the passage of gas supply or air
  2. 2. from which metal has been removed by a cutting process
  3. 3. which is created by combining two or more metallic elements
  4. 4. Light,type of light wave which is not visible to the human eye
  5. 6. metal through which current is conducted between the electrode holder
  6. 9. Radiation,ultraviolet light and heat emitted from any arc welding or cutting process
  7. 11. substance which transmits electrical charges
  8. 13. Arc, result of ionizing gas with an electrical current which can cut through
  9. 14. Supplied Respirator,respirator which contains its own air source or filters air through a filtration
  10. 17. Ventilation,supplying fresh air to a location and moving foul air away from the location
  11. 18. sustained luminous discharge of electricity across a gap in a circuit
  12. 20. which does not transmit electrical charges
  13. 22. Speed,speed at which the electrode moves down the work piece
  14. 25. Distance,distance from the tip of the cutting torch relative to the work piece
  15. 26. removal of an old weld or imperfections in the work piece
  16. 28. Per Square Inch (PSI),unit of pressure; used to describe pressurized or compressed gases
  17. 29. Angle,angle formed between a prepared edge of a member
  18. 34. spot around a weld or overlapping surface hole