Wood Working General

123456789101112131415161718
Across
  1. 2. Raise the chuck up and down, to keep the bit cool and __.
  2. 8. used to sink screws.
  3. 9. Must be worn whenever the possibility of an eye injury exists.
  4. 10. Used to guide small pieces past the table saw blade.
  5. 11. Helpers should only __ the wood, not pull.
  6. 15. The longest method of drying wood.
  7. 16. When the machine throws the wood at you.
  8. 17. Layers of wood, glued together, make this type of wood product.
  9. 18. The chuck __ must be removed before turning on the drill press.
Down
  1. 1. intended for striking blows without causing damage like a hammer.
  2. 2. What the radial-arm saw is intended to do to wood.
  3. 3. Oak is an example of this type of wood.
  4. 4. Used to 'thin' a board.
  5. 5. This behavior will NEVER be tolerated in the shop.
  6. 6. Pine is an example of this type of wood.
  7. 7. tool used to check and mark 90 degree angles.
  8. 11. used to mark a location or scribe a line.
  9. 12. Tell the _____ immediately if you get injured.
  10. 13. The distance your hands should stay away from the moving blade.
  11. 14. Used for 'flattening' the edge of a board.
  12. 16. This method of drying wood 'bakes' the moisture out of the wood.