Year 11 MDT Woodwork (General)

123456789101112131415161718192021222324
Across
  1. 3. _________ hair and clothing should be tied
  2. 4. Pines are a type of ________
  3. 7. A _______ is a sharp, spiked tool used to mark the centre of holes in timber.
  4. 9. when using a pedestal drill.
  5. 11. ____ saw is the common type of saw used in Woodwork.
  6. 12. should always be worn when using noisy machines and equipment.
  7. 14. woodplanes are used along the _____ to remove excess wood.
  8. 15. Used to measure wood.
  9. 17. To ensure a cut line without splintering the timber, you should always use a ________ _______.
  10. 19. _______ are used to remove nails.
  11. 23. A machine consisting of a long blade that cuts timber.
  12. 24. The tool used to mark lines at 90 degrees to an edge.
Down
  1. 1. Should always be worn in a workshop
  2. 2. __________ is used in conjunction with a chisel.
  3. 5. The tool used to mark lines parallel to an edge.
  4. 6. The two types of natural timbers are softwood and ________
  5. 8. When sanding, begin with a course grade abrasive and work to ____
  6. 10. The hammer most commonly used in a wood workshop.
  7. 13. The type of wood chisel most often used in a workshop.
  8. 16. Softwood timbers often have these.
  9. 18. Hardwood timbers often have these.
  10. 19. A common type of wood glue
  11. 20. ______ resin is often coloured and used to make decorative features in wood.
  12. 21. Enclosed _______ must always be worn in the workshop.
  13. 22. _______ is a hardwood that is native to Western Australia.