Across
- 7. The lowest point of an internal thread is called a what?
- 10. The part on a tap that funnels shavings away is what?
- 12. Course thread bolt is labeled as what three letters?
- 13. What does AWG stand for?
- 14. A hacksaw does not cut on which stroke
- 17. Lubricants reduce what?
- 22. OSHA stands for what?
- 25. Checking this with a meter requires the power to be turned off.
Down
- 1. What does PPE stand for?
- 2. What tool do we use to align two sheaves?
- 3. TPI stands for _____ per inch.
- 4. This is used to keep someone from turning on a machine it is being worked on.
- 5. what hammer would be used to drive a race into a piece of equipment?
- 6. NEC stands for what?
- 8. What type pin has both legs bent once it is passed through the hole?
- 9. A small round file is sometimes referred to as a what?
- 11. Tongue and groove pliers are also known as what?
- 15. Piece of metal used to align a pulley on a shaft and to keep it from spinning.
- 16. The most often used material for a flat belt is what?
- 18. How will you know when some torque wrenches get to their torque setting?
- 19. What type of tap is used to start the tapping procedure?
- 20. What three things are required to create fire, fuel, air, and ___________
- 21. Only person to have a key to your lock, on a lock out tag out.
- 23. Most fire extinguishers are labeled for what type fires?
- 24. Brand name for side cut pliers