Air Polishing Vs. Rubber Cup Polishing

Edit Answers
1234567891011121314151617181920212223242526272829
Across
  1. 2. Are round, flat, nonabrasive particles.
  2. 6. For air-polishing, a Restricted ___________ diet should be followed because this element is high in most polishing powders.
  3. 7. A polisher that uses air and water pressure to deliver a controlled stream of slurry
  4. 8. Is air driven and attached to the dental unit slow-speed line.
  5. 10. Establish a external _________ ___________ fulcrum.
  6. 11. Hold nozzle 3 to 4 mm away from __________ surface.
  7. 12. Removes deposits and stains; produces a smooth tooth surface.
  8. 14. For anterior teeth, the tip should be at a ____ _________ angle.
  9. 16. Aerosol reduction device that attaches to outside of air polishing unit.
  10. 19. Cup the patient's _____ and use your hand to block the aerosol.
  11. 20. Its recommended this type of evacuation to eliminate aerosol production.
  12. 22. After each use, clean the powder nozzle tip with a _____ to prevent powder from clogging the tip.
  13. 23. In all polishing techniquue you should _______ periodically.
  14. 26. During the rupper cup method, this is needed to make the rim of the cup flare slightly.
  15. 27. During polishing use constant ___________ motion, inter-proximal to inter-proximal.
  16. 28. Angle spray towards the _________.
  17. 29. A sudden uni-lateral swelling of the face, head, or neck because the presence of air in the connective tissue.
Down
  1. 1. Is less abrasive than traditional prophylaxis pastes.
  2. 3. Those with renal disease can develop __________ imbalance due to the high amount of sodium in polishing powder.
  3. 4. The rubber cup method is ________ than Air polishing.
  4. 5. Is used to hold a rubber cup or other attachment.
  5. 9. For occlusal surfaces, the tip should be positioned at a ___ _________ angle.
  6. 13. Spray should be directed toward ________ ________ of tooth.
  7. 15. For posterior teeth, the tip should be at a ____ _________ angle.
  8. 17. NEVER powder spray directly into a _____________.
  9. 18. Act by producing scratches in the surface of the tooth
  10. 21. The main function of polishing agents is to remove soft deposits and _________ stain.
  11. 24. The angle tip should be aimed _________.
  12. 25. During air-polishing ____________ disease may limit swallowing.