original crossword puzzle

Edit Answers
123456789101112131415161718192021222324252627282930
Across
  1. 2. Select rounded edges, such as holes or fillets. A center mark pattern including pcd is created
  2. 6. Assign physical material to components and bodies to give them physical properties
  3. 10. Reports distance, angle and positional data for the selected points.
  4. 12. Creates a view of the referenced design
  5. 15. Creates a construction plane that is tangent to a cylindrical or conical face at the mouse point
  6. 18. plane Creates construction plane that Is offset from the selected face or plane
  7. 19. Creates a construction plane through an edge, axis, or line at a specified angle
  8. 20. Bevels the edge of a solid shape
  9. 22. Select rounded edge, such as a fillet, hole, sphere, or cylinder.
  10. 24. Creates new bodies by selected profiles
  11. 25. Creates projected orthogonal and isometric views of the design
  12. 27. Reports the interference between selected solid bodies or components
  13. 30. Select two straight edges. The centerline is created between them
Down
  1. 1. Creates half, full, offset, or aligned section view through the design.
  2. 3. Rounds the edges of a solid body by adding material to interior edges and removing exterior angles
  3. 4. Reports distance, angle, area, or position data of the selected object
  4. 5. Join cuts intersections of 2 or more body into 1 body
  5. 7. Reports the interference between solid bodies or components
  6. 8. Divides faces using a selected profile as the cutting tool
  7. 9. Remove material from part of the interior creating a hollow interior
  8. 11. Creates a construction plane normal to an edge or sketch profile
  9. 13. Scales objects
  10. 14. Creates a construction plane passing through to linear edges or axes
  11. 16. Creates a construction plane that is tangent to a cylindrical or conical face
  12. 17. Creates a construction plane through three points
  13. 21. Creates a construction plane at the midpoint between two faces or work planes.
  14. 23. Creates a circular detail view of a portion of the design
  15. 26. Applies a fixed line to planner faces
  16. 28. Assign appearance to physical bodies without changing properties
  17. 29. Modifies the selected geometry using offset, extrude or fillet commands. The operation depends on the geometry selected