Across
- 1. Active Shooter, Run, ______, Fight
- 7. _________communication standard requires safety data sheets for all hazardous materials
- 9. DSC stand for Diversified Service ___________.
- 12. OSHA stands for Occupational Safety and ______ Administration.
- 14. Report all incidents and injuries __________.
- 15. Fire _____ required for 30 minutes after hot work is complete
- 17. _________ panels must have 36 inches of clearance on either side.
- 19. Fall Protection is required when you are exposed to a fall greater than ___ft for construction and 4 ft for general industry
Down
- 2. PPE stands for Personal Protective _______.
- 3. ________lift is 75 percent of crane capacity
- 4. Class of fire extinguishers used in the shop.
- 5. Slips trips and ____ are a leading cause of workplace injuries.
- 6. Forklifts should be _________ before each use.
- 8. Hearing protection is required when noise levels exceed 90 _______ over an 8 hours shift.
- 10. Never use the top ___ steps of a ladder
- 11. Shade 10 lens is required when _______.
- 13. No flammable or combustible ______ within 25ft of hot work.
- 16. protection required on head when using a grinder
- 18. Required on all products and chemicals not designated for immediate use.