3GESI - PBL Overview

Edit Answers
123456789101112131415161718192021222324252627282930313233343536373839
Across
  1. 1. Highest safe temperature during operation. (2)
  2. 4. Electric motor where the rotor turns slightly slower than the magnetic field. (2)
  3. 7. Signal that changes continuously with measurements. (2)
  4. 9. Time when a machine or system is stopped. (2)
  5. 10. Information collected about how a system works. (2)
  6. 15. Value limit that triggers a warning or shutdown. (2)
  7. 16. Expected working life of a motor. (2)
  8. 17. Small space between the rotor and stator of a motor. (2)
  9. 23. Process of creating electric current using magnetism. (2)
  10. 25. — Repairs done to fix a machine after it breaks down. (2)
  11. 28. Property that slows the flow of electric current. (2)
  12. 30. System used to remove heat from equipment. (2)
  13. 31. Ability of a system to operate without failure. (2)
  14. 32. Voltage level the motor is designed to use safely. (2)
  15. 33. Movement of electric charge through a conductor. (2)
  16. 34. System that stops equipment when it becomes too hot. (2)
  17. 35. Amount of work or force applied to a motor. (2)
  18. 36. Industrial computer that controls machines automatically. (3)
  19. 37. Unequal electrical conditions between phases. (2)
  20. 38. Motor system used to power industrial machines. (2)
  21. 39. Maintenance done to avoid future problems. (2)
Down
  1. 2. Watching system conditions continuously while it runs. (3)
  2. 3. When electrical voltage rises and falls irregularly. (2)
  3. 5. Maximum safe condition for operating equipment. (2)
  4. 6. Electrical signal used to send a command to a device. (2)
  5. 8. When a machine carries more load than it should. (2)
  6. 11. Method of producing electric current using a changing magnetic field. (2)
  7. 12. Finding problems or faults in a system. (2)
  8. 13. Continuous monitoring of equipment operation. (2)
  9. 14. Path followed by magnetic energy inside a machine. (2)
  10. 18. Movement of magnetic energy through a material. (2)
  11. 19. Closed path that allows electricity to flow. (2)
  12. 20. Electrical signal produced by a sensor. (2)
  13. 21. Standard values that show how a machine should normally operate. (2)
  14. 22. Signal with two states such as on and off. (2)
  15. 24. Process of releasing heat from a machine. (2)
  16. 26. Fixed metal part of the motor that holds the windings. (2)
  17. 27. Using less energy to perform the same work. (2)
  18. 29. Increase of temperature during machine operation. (2)