Alaris Pump

1. To insert the primed administration set into the pump, hold the upper fitment above the fitment recess and _______ filament into the recess.
4. The pump mode that allows a module to be paused indefinitely will be automatically disabled when the power cord is ________________.
7. To turn off the entire system at once, including all running channels, use the OPTIONS key labeled ___________________
9. To remove an administration set, gently pull the tubing below the _____________________ forward and out.
11. To quickly locate a desired drug, use the ______________ menu keys to narrow the search.
12. Drug __________ and volume to be infused (VTBI) must be entered before starting the pump.
18. Total number of Module Channels that can be added.
19. After closing the module door, the administration set roller clamp should be _________.
20. After both the upper fitment and the recess fitment are loaded, use a ____________ to firmly push the silastic pumping segment tubing toward the back of the air-in-line (AIL) Detector.
21. The pump mode that allows a module to be paused indefinitely can be accessed via what key?
22. After loading the administration set into the upper fitment, press the _____________ fitment into the recess below the mechanism.
23. When adding a module, rotate it down onto the unit until the bottom latch_______ into place.
24. When inserting administration set into the pump, assure the silastic pumping segment is not _________.

1. After selecting the channel to program, next select the Guardrail ___________ menu.
2. When the pump is first turned on the display will ask if you have a ___________.
3. Turning off the only working channel will ___________________ the entire system.
5. After priming the tubing, place the _____________ in the closed position.
6. Module Channels should be added at a ___________ degree angle to the unit or another module.
8. To turn a channel off, press and hold the _____________ key.
10. A properly set-up administration set should have ______________ flowing though the drip chamber.
13. When a module channel door is opened with an administration set loaded, the safety clamp fitment will automatically _____________ to prevent accidental free-flow of medication.
14. What pump mode allows a module to be paused indefinitely without alarming?
15. The Alaris PC Point-of-Care Unit is also called the ___________.
16. To turn on the Alaris pump, push the _____________ key.
17. To program a specific channel, start by pressing the ________________ button.
25. While priming the pump tubing, be sure to remove air at the injection ports by ___________ them while inverted.