Across
- 1. Type of wrench that should be used for heavy-duty jobs and in certain close-quartered situations.
- 3. Type of pliers used for general jobs for larger objects.
- 7. the must frequently used tool, whose purpose is to hold and turn nuts, bolts, cap screws, plugs, and various threaded parts.
- 8. When working with tools it is advisable to wear ____ and safety glasses.
- 9. Type of multimeter that displays a readout in numbers and offer greater accuracy and faster readouts.
- 11. (2 words) Pliers for everyday tasks in which its jaws can be adjusted into two different positions.
- 13. Type of wrench used for adjusting and removing fan blades or other components that are held in place by allen set screws.
- 15. (2 words) cutting tool designed for cutting holes in metal, wood, and concrete.
- 17. used for cutting metal and has an adjustable frame.
- 20. Tools should be kept _____ and in good working order.
- 22. This type of hand tool should be used when working with electricity and electrical components.
- 24. (2 words)type of pliers must commonly used with electrical work and can also be used to form wire loops and grip tiny pieces firmly.
- 25. A _____ knowledge of hand tools, electrical tools, and test meters is necessary to effectively complete most installations and repairs.
- 28. Starts with accident prevention.
- 30. (2 words) Type of screwdriver used on screws that have a slot in the screw head.
- 32. Type of wrench that are used to slip over bolt heads.
- 33. When using a screwdriver, always use the ______ size to fit the slots on the screw head.
- 35. (2 words) Tools used in assisting with the diagnosis of the various problems that arise with appliances.
- 36. Type of tool that does the job faster than a hand tool.
Down
- 2. (2 words) Type of wrench useful for medium-duty work or situations where it is impossible to fit a socket or box wrench on a nut, bolt, or fitting from the top.
- 3. Type of screwdriver used to attach or remove screws that have two slots crossing at right angles in the center of the screw head.
- 4. A tool for holding or cutting, depending on the type.
- 5. A hand tool used either to attach or remove screws.
- 6. A prying tool used for heavy-duty work.
- 7. A test instrument used to check the total wattage drawn by an appliance.
- 10. A prying tool used for medium-grade work.
- 12. Most common type of hammer used in appliance repairs.
- 14. It is best to use a heavy-gauge wire extension cord to ensure adequate _________ for the tool being used.
- 16. Cutting pliers used in electrical work for cutting wire and rope.
- 18. Used for cutting metal and wood and used when removing rusted bolts and nuts.
- 19. _____ volt-ohm-milliammeter is used for testing the resistance, current, and voltage of the appliance or air conditioner.
- 21. (2 words) A hand tool in which the working end of the tool is hexagonal-shaped and fits over a hexagonal nut or a hexagonal bolt head.
- 23. _________ tester is used to measure the operating temperatures of the appliance.
- 26. (2 words) Type of pliers that is four tools in one: a clamp, a pipe wrench, a hand vise, and pliers.
- 27. A cutting tool used to remove excess material from objects.
- 29. Type of wrench that helps with light-duty jobs and works well with odd-sized nuts and bolts.
- 31. (2 words) Never use ______-_____ tools.
- 34. A test instrument that is connected into a circuit to measure the current of the circuit without interrupting the electrical current.