Across
- 4. The first item under rear panel overview of the power supply is.
- 5. what button on the oscilloscope do you press to bring up the frequency domain?
- 7. A surface plot can be made with this command in Matlab.
- 11. All plagiarized material will receive a _______ as a score.
- 14. When working in the vicinity of high voltage power you should contact the lab manager. High voltage is defined as above ________ volts AC or DC.
- 15. Class C fires are contained using CO2 and what other type of fire extinguisher.
- 16. What is the last name of the author of Writing the Laboratory notebook.
- 19. page 1-5 in the Matlab textbook is named matrices and ______.
- 21. What do the black wires represent on the ADK?
- 23. When replacing the fuse on the power supply what is the cord that you take out first.
- 24. How many labs are in electronics 2.
- 26. How many points will be deducted each day an assignment is late?
- 28. Indicated by the (>>) prompt. this window will allow you to enter lines of code in Matlab.
- 30. A loose leaf binder is inferior to this kind of notebook.
- 31. Both waveform wires are yellow. Waveform 2 has what on it to separate it from waveform 1?
- 34. The positive scope color on the ADK is what color?
- 35. The title on page 23 of the function generator manual is _______.
- 37. The front panel button Ch1/2 will toggle between how many channels on the function generator?
- 38. There is no eating or _______ at the laboratory benches.
- 39. You can label the X-axis of the graph with this command in Matlab.
- 41. This command will get rid of any selected wire in the workspace in multisim.
- 42. Page 17 shows steps on how to upgrade the bandwidth. Step 2 says to push what on the oscilloscope?
- 43. Notes should be recorded in ________ rather than pencil.
- 45. What color is the waveform generator 2 on the ADK
- 46. How many steps does it take to change the time and date of the oscilloscope.
- 47. Professor Bowden's office hours are from 10:30 - 11:30 on this day each week.
- 48. To select the local language on the Function Generator what button should you press second?
Down
- 1. Chapter 9 in the multisim manual is titled ______.
- 2. The third safety symbol on page 5 of the benchtop power supply manual shows a lightning bolt with a triangle. What does this represent?
- 3. This test is given twice a semester. It evaluates your laboratory knowledge.
- 6. You can adjust the output voltage for channel 1 and 2 of the power supply with this.
- 8. This is the fifth element added to the lab report.
- 9. 8% of your final course grade is designated to this criteria.
- 10. How many I/O signals are there on the ADK?
- 12. This command removes selected components, circuits, or text in multisim.
- 13. What circuit is the title of lab 5?
- 17. All labs and lectures are located in this hall.
- 18. Place source, Place basic, and Place diode are all part of what toolbar in multisim?
- 20. On page 36 of the oscilloscope manual, Front panel menus, controls , and connectors are covered. What is number 5 on that page.
- 22. Howard Kanare received his B.S. in chemistry at the University of _________.
- 25. The design toolbox _______ will allow you to choose which layers to display on the workspace in multisim.
- 27. How long should a lab entry be written after the lab is work is done?
- 28. What is the format of lab reports 3 and 5?
- 29. Chapter 4 in the Matlab textbook is on _______.
- 32. Under function check step 3 the manual says to connect the probe to where on the oscilloscope?
- 33. How many weeks are in the schedule?
- 36. To adjust the waveform parameters on the function generator first press ________.
- 40. What is the first item listed on page 13 of the function generator manual?
- 41. Professor Bowden's first name is ______.
- 44. How many steps are there on the memory keys on the function generator?