assignment 1

Edit Answers
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849
Across
  1. 2. default function generated
  2. 6. used to measure AC/DC current or voltage
  3. 7. number of functional areas on front panel of AFG1022
  4. 11. second item on the front panel
  5. 13. button that brings back the specified setup
  6. 14. unit of magnitude
  7. 18. FM, AM and ___ signals that can be configured in the advanced settings
  8. 19. number of requirements for a graph
  9. 22. burst mode controlled by a remote command
  10. 23. brackets used to denote a parameter type
  11. 25. magnitude and phase plot in the polar coordinate system
  12. 28. instrument that measured voltage or current fast
  13. 30. where the lab notebooks are sold
  14. 31. number of steps to do a current output check
  15. 35. what is 8% of our final grade
  16. 36. type of generator that creates different waveforms
  17. 37. what happens friday's from 10:30-11:30
  18. 38. number of steps to acquiring a signal
  19. 40. settings that allow the user to set the max voltage
  20. 42. requirement worth 35% of grade
  21. 44. configuration menu used for getting waveform data points
  22. 45. last name of author of the most valuable notebook the last few decades
  23. 46. type of ink used the in the lab notebooks
  24. 47. order in which readings are stored
  25. 48. type of testing that allows the user to set or low values
  26. 49. shows waveform, measurement and instrument settings
Down
  1. 1. seventh requirement on cover page
  2. 3. contains 100% chemically purified wood pulp
  3. 4. tool that allows user to save data on each acquisition
  4. 5. type of counter used to find the signal frequency
  5. 8. number of channels
  6. 9. tool used to display data in different formats
  7. 10. required to be finished before the lab
  8. 12. number of sections of a lab report
  9. 15. default sweep type
  10. 16. chemical found in electrical fire extinguishers
  11. 17. day lab lectures are on
  12. 20. prerequisite for this course
  13. 21. plot that shows magnitude and phase
  14. 24. when the instrument automatically compares the input signal to 0
  15. 26. why notebooks prevent fraud
  16. 27. mathematically converts the standard time domain signal into frequency components
  17. 29. default setting for range selection
  18. 32. last name of the author of "writing the laboratory Notebook"
  19. 33. name of the 5th lab
  20. 34. last name of lab instructor
  21. 36. number of waveforms on the instrument
  22. 39. inventor of the lightbulb
  23. 41. current method used to measure resistance
  24. 43. type of bandwidth that has a % of power in the analysis bandwidth