Assignment 1 Electronics Lab

Edit Answers
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152
Across
  1. 4. You should record _______ in your lab notebooks just in case. [2]
  2. 6. The yellow cables from the port labeled W1 and W2 on the ADK are the _________ generator ports. [8]
  3. 12. There are two ________ codes each lab lecture that must be entered into blackboard to receive credit.
  4. 13. You should never leave any _____ space in your lab notebook. [1]
  5. 15. Professor Bowden has zero-tolerance for _____. [3]
  6. 19. You will use the ________ knob to scroll through options on most popout menus. [4]
  7. 20. This is used to mean that channel 1 and channel 2 of the power supply is connected in parallel. (p. 3-3) [6]
  8. 21. When creating a user-defined waveform the minimum mount of points necessary is _____. (p. 29) [5]
  9. 22. The keys on the power supply will ______ when pressed unless this setting is turned off. (p. 3-10) [6]
  10. 24. You must use a _____ to write in your lab notebook. [1]
  11. 25. You can _______ Channels 1 and 2 on the power supply when needed. (p. 3-7) [6]
  12. 27. A ______ must sign and date each page of the laboratory notebook upon completion. [2]
  13. 29. ______ and your UML email should be checked regularly for materials and information for this course. [3]
  14. 32. You can also ________ the screen in the display page, and this is necessary as no waveform will be accepted without a name and semester. [4]
  15. 33. ________ are made with square brackets and a space or a comma separating each number in matlab. [10]
  16. 35. There is a button called _________ that will adjust the screen of the oscilloscope for you, but as an electrical engineer you should not rely on this button. [4]
  17. 36. These notebooks are fine for other subjects, but not for laboratory notebooks. [2]
  18. 39. You can add any _________ that is used in the lab into multisim to see the ideal behavior. [9]
  19. 40. The ________ window is where the code is to be executed in Matlab. [10]
  20. 41. One of the buttons on the function generator that can be pressed to generate a built-in waveform. (p. 27) [5]
  21. 42. Professor Bowden’s usual zoom background from Circuits II lab lectures Spring 2021.
  22. 45. The unlabeled _______ buttons on the side of the function generator can be used to select option when a menu is on the side of the screen. (p. 14) [5]
  23. 46. A brief explanation of the background of the lab and how it is to be conducted. [1]
  24. 48. The application needed to run the ADK is ________. [7]
  25. 49. This command allows multiple things to be grpahed on one simple graph. [10]
  26. 51. Materials are ______ to the students for the duration of this course. [3]
  27. 52. The Analog Disocvory is manufactured by _____ and is a necessity for this course. [3]
Down
  1. 1. The port on the ADK that has a down arrow is the _______ port. [8]
  2. 2. Screencaptures from waveforms should always be ________ and not screenshots of the screen, as the screenshots tend to be a bit blurry. [7]
  3. 3. One of the most important reasons we keep a notebook. [2]
  4. 5. Waveforms allows the _________ of windows in order to see various windows at once. [7]
  5. 7. There are no _____ mandating the organization or the keeping of notebooks. [2]
  6. 8. If more information is desired for the power supply, go to the ________ website. (p. 6-1) [6]
  7. 9. A ______ cable must be used to connect the function generator to an oscilloscope. (p.23) [5]
  8. 10. There are ______ makers on multisim that can be used to generate certain circuits. [9]
  9. 11. There are many different _________ available on waveforms, such as the oscilloscope, wavegen, supplies, meters, analyzer, etc. [7]
  10. 14. a pre-lab is a ______ lab report. [1]
  11. 16. To add a name to the graph in matlab type ______ followed by parenthesis, quotes, and the actual name. [10]
  12. 17. You can adjust the _______ by going to display from the utility page and using the knob to adjust as desired. [4]
  13. 18. All graphs should be created using this software. [1]
  14. 23. The ___________ knob on the function generator can be used to adjust various quantities in various settings. (p. 32) [5]
  15. 24. Matlab is commonly used for graphs, when they are 2D the function ______ can be used. [10]
  16. 26. You can load an _______ model in multisim. [9]
  17. 28. The _______ knob adjusts the amount of waveforms visible on the screen. [4]
  18. 30. You can _______ almost everything on multisim to match your preferences. [9]
  19. 31. ______ is a button used the set a specific current for a channel on the power supply. (p. 3-3) [6]
  20. 34. All documents must be submitted in _____ format. [3]
  21. 37. To output a waveform the first button you must press is ______. (p. 37) [5]
  22. 38. To make a 3D plot in matlab, use the function ________. [10]
  23. 43. You must use a ______ to store the screenshots taken on the oscilloscope to then be recorded in your lab report. [4]
  24. 44. ___________ numbers are able to be typed into matlab in rectangular or polar form. [10]
  25. 47. You can edit the __________ parameters of most components in multisim. [9]
  26. 50. The ______ button is denoted with an A in multisim. [9]