Across
- 3. Component that bolts to the knuckle and holds the pads
- 5. Required tool for tightening brake fasteners correctly
- 7. Surfaces should be _____ before installing new pads and hardware
- 9. You must always _____ mounting and slide pin bolts to the correct specification
- 10. Needed on slide pins to prevent binding
Down
- 1. Torque values should always match the manufacturer _____
- 2. Springs and clips that should be replaced during pad service
- 4. Fasteners that secure brake components in place
- 6. Must move freely for even brake pad wear
- 8. Always follow proper brake _____ procedures