Ben Naehr

3. places where parts meet.
4. a solvent based synthetic coating that dries through solvent evaporation.
5. machines that pull materials through die openings to form them.
10. intelligence exhibited by a manufactured device or system.
12. devices in which force is delivered to complete a forming action. they slowly close die halves by lowering a ram to produce a squeezing action.
13. an action that brings new material in contact with a cutting tool and allows the cutting action to be continuous.
14. a separate motion based upon the motion of a tool against a workpiece.
15. a process used to soften and remove internal stress in a part.
16. a process used to increase the hardness of a material.
17. a thermal conditioning process used for ceramic products.
20. molds that are destroyed to remove the cast item.
22. the point at which a material cannot withstand any more force.
24. a process in which material is pushed through a hole in a die.
25. coatings that dry through polymerization.
27. a varnish that has color pigment added.
28. an electrolytic process.
30. dipping a material in a solvent to remove unwanted materials. also called chemical cleaning.
31. a separate process that uses opposing edges of blades, knives, or dies to fracture unwanted material away from a workpiece.
32. an assembling process that uses cohesive or adhesive forces to hold a part together.

1. the range in which a material can be stretched, compressed, or bent.
2. a technique in which stock is run through a vat of molten metal.
5. separating machines that produce or enlarge holes using a rotating cutter for the cutting motion.
6. a device that delivers force to complete a forming action. hammers drop or drive a ram down with a quick action.
7. am action that causes material to be removed from a workpiece.
8. devices used to hold parts together.
9. the point at which a material will not return to its original shape after being stretched.
11. a change caused by adding chemicals
18. the thermal conditioning processes used on metals.
19. a process used to relieve internal stress in a part.
21. molds that withstand repeated use.
23. a mechanical device that can perform tasks automatically or with varying degrees of direct human control.
26. a clear finish made from a mixture of oil, resin, solvent, and a drying agent.
29. simple dies consisting of two flat die halves.