Across
- 3. a device to hold work in process
- 5. Rails around the base of a table to which the top and legs are joined & a Veritas Plane 05P27-71 - This small, low angle block plane is ideal for trim carpentry, and at 400g it is half the weight of a standard block plane, which is a big plus if you carry it in your apron all day.
- 6. a highly figured outgrowth on a tree, valued for turning and figured veneers
- 8. A type of bit used to bore clean, flat-bottomed and generally larger holes.
- 9. to sharpen
- 11. the part of a tree where there is a V-split in the trunk; this wood is sometimes highly figured and is valued for turning and carving
- 12. The wooden handle on a knife
- 15. A device, usually leather, used to hone the edge of a blade
- 17. to saw a negative profile in one piece to fit the positive profile of another, usually in moulding
- 18. SILBERGLEIT!
- 20. The mounting shaft for a saw blade
Down
- 1. a combination or iron, carbon and alloy metal (usually tungsten) used to make hard, brittle but long-lasting material used for cutting edges of bits and blades
- 2. Compass-like hand tool for measuring inside and outside diameters
- 3. “Computer numerical control” a device that processes a piece of material to specifications defined in a computer software
- 4. The narrow Robert Sorby Slim Tool RSB-B830S08 is a good choice for all woodturners as it removes a small amount of material, making it good for grain matching. The deep blade eliminates any flew in the narrow blade.
- 7. The wood of any coniferous tree
- 10. the molded and projecting horizontal piece that crowns architectural structure
- 13. the face of a tenon, center lap or end lap; the long-grain walls of a mortise; or the long-grain mating surface of dovetails and their pins or box-joint fingers
- 14. A situation where the wood material has broken along the grain
- 16. mature wood that forms the spine of a tree
- 19. a piece of wood used to distribute pressure when clamping