ch8 electrical power systems

1234567891011121314151617181920212223242526272829303132333435
Across
  1. 2. A switch that makes or breaks a circuit based on the input or touch of the switch. When the switch is not depressed, the switch returns to its default status.
  2. 3. The “building block” of everything we know of on earth. Atoms are made up of protons, neutrons, and electrons.
  3. 6. A material made of atoms that transfer electrons easily.
  4. 10. A device that converts mechanical energy into electrical energy by using electromagnetic induction
  5. 11. The continuous flow through a component or an entire circuit.
  6. 12. A material attracted to any metal containing iron.
  7. 13. A restorable device that breaks the circuit if too much electrical current passes through it.
  8. 14. The flow of electrons in a conductor.
  9. 15. A material made of atoms that do not transfer electrons easily.
  10. 21. The type of charge an atomic particle has.
  11. 24. A filament that breaks the circuit if too much electrical current passes through it. It prevents damage to the rest of the circuit in the event of an overload.
  12. 27. The production of electricity in conductors with the use of magnets.
  13. 28. A terminal on a cell or battery.
  14. 29. A device used to check for continuous electron flow throughout an electrical circuit or through circuit components.
  15. 30. Electrons flow from a negative point to a positive point
  16. 32. A properly functioning circuit in which all loads are energized.
  17. 33. A liquid or paste that surrounds and touches electrodes, causing a chemical reaction between the electrodes and electrolyte, which produces an electrical current.
  18. 35. A switch used to control a load from two different locations.
Down
  1. 1. A material that is both a conductor and an insulator.
  2. 4. A switch used in conjunction with two single-pole, double-throw (SPDT) switches, allowing one or more loads to be controlled from three or more locations.
  3. 5. Wattage multiplied by the number of hours the wattage is used and then divided by 1000. It is the unit by which customers are billed for electricity usage.
  4. 7. A circuit or part of a circuit that is not energized.
  5. 8. A power source, a load, and conductors connected together so electrical current flows in a complete path.
  6. 9. A type of cell that cannot be recharged.
  7. 16. A drawing that traces the path electron flow will take in an electrical or electronic circuit. Symbols are included that represent the components in the circuit.
  8. 17. A measurement of electrical power calculated by multiplying voltage and amperage.
  9. 18. A device used to increase or decrease voltage supplied to a circuit.
  10. 19. A type of cell that can be discharged and recharged many times.
  11. 20. The outermost ring of electrons in an atom.
  12. 22. A device that can trip to open a circuit in case of an imbalance between the feed and return legs. It is designed to protect people and so is more sensitive than a circuit breaker or fuse and provides a quick reaction time.
  13. 23. A circuit in which the load is bypassed and the hot wire comes directly into contact with the return leg or with something grounded.
  14. 25. A common device for storing electrical power. A cell converts chemical energy to electrical energy.
  15. 26. A switch that makes or breaks one set of contacts to turn a load on and off.
  16. 31. The rate at which electrons move, or amperage.
  17. 34. Voltage (E) can be determined by multiplying current (I) by resistance (R).