Chapter 14

1234567891011121314151617181920212223242526272829303132333435
Across
  1. 5. Solvents added to the ink to thin the viscosity and slow the drying time
  2. 6. A control device that prevents more than one sheet of paper from entering the press
  3. 9. An insturment that measures screen fabric tension
  4. 11. A measuring scale used to determine the acidity or alkalinity of a soltion. The pH scale is numbered from 0-14, with 7 designated as neautral. A pH value below 7 indicates an acidic solution; a value above 7 indicates an alkaline solution
  5. 14. A relief printing process that uses flexible printing plates for printing long run jobs
  6. 15. A printing system component that brings the paper to be printed into contact with the blanket cylinder
  7. 17. A printing system component that holds the plate on the press
  8. 18. A splicer unit on a web fed system that uses a set of festoon rollers o draw out slack from the web and feed the press while a splice is being made
  9. 19. Solvent used to dissolve ink from a screen
  10. 21. A method of printing from cells or depressions that are engraved below the nonimage area of the printing cylinder
  11. 23. printing system that prints bith sides of the substrate at once
  12. 25. A device used to bond a new roll to the end of an existing web on a web-fed press
  13. 26. A group of rollers designed ti carry ink to the image area of the printing plate
  14. 29. Devices that provide a vacuum to remove sheets from a stack and position them for access go the press
  15. 30. A lithographic press that prints with one long, continuous web of paper that us fed from a roll
  16. 31. A feeing system mechanism that places paper in egister for printing on a press
  17. 32. The distance across individual open areas between adjacent threads
  18. 34. A single thread
  19. 35. Threads that run horizontally, at a 90" angle to the wap threads
Down
  1. 1. Flexible relief plates commonly ised in flexographic printing
  2. 2. The result of poor cutting or adhering techniques of stencils, which can cause imperfect images
  3. 3. Adjusting images to optimize values for highlight and shadow, neutral tones, skin tones, and sharpness, to compensate for impurities in the printing ink and color speration
  4. 4. A group of ylindrrs used to transfer images from the printing plate to the subtrate. In lithographic press, the printing system consists of a plate cylinder, a blanket cylinder, and an impression cylinder
  5. 7. A group of rollers designed to apply moisture to the nonimage area of the printing plate
  6. 8. The vertical distance between the surface of the cylinder bearers and the cylinder body. This allows for the thickness of the plate or blanket and packing
  7. 10. Solvents added to ink to change the viscosity of the ink. They do not affect the drying time
  8. 12. A relief press that prints by pressing a type form or plate against a platen, the surface that holds the paper to be printed
  9. 13. A uniform stack of paper that accepts sheets from the delivery system of sheet-fed press
  10. 16. A curved or triangular plane that serves as the folding surface on a web fed press
  11. 17. A measurement that indicates the acidity or alkalinity of a solution, as measured on the pH scale
  12. 20. A rubber or plastic blade used to force ink through the open area of a screen printing stencil
  13. 22. A resilient material that is attached to a cylinder and used as an image transfer material from the plate cylinder to the substrate
  14. 24. A duplicate relief plae that is produced from a mold through an electrochemical process
  15. 27. The number of threads (or strands) per linear inch in a fabric
  16. 28. A device that automatically shuts down the press if the web snaps or tears
  17. 29. A lithographic press that prints paper one sheet at a time as it is fed through the system
  18. 33. Threads that run vertically at a 90" angle to the weft threads