Chapter 7 Introduction to Networking

Edit Answers
123456789101112131415161718192021
Across
  1. 2. Algorithm used to prevent network loops in a LAN
  2. 7. likely to be the result of collisions or other unwanted signals
  3. 8. used for error detection
  4. 10. uses half-duplex
  5. 12. frame less than 64 bytes in length
  6. 14. vendor specfic part of the MAC address
  7. 16. can offer better performance
  8. 18. FF-FF-FF-FF-FF-FF
  9. 19. MAC address table is sometimes referred to
  10. 20. Method of discovering hosts on an IPv6 network
  11. 21. ports only operate in full-duplex
Down
  1. 1. forwarding method receives the entire frame and computes the CRC
  2. 3. forwards the frame before it is entirely received
  3. 4. A one-to-one communication in a network
  4. 5. MAC address is a broadcast or a multicast the switch
  5. 6. When a switch is turned on, the MAC address table
  6. 8. Offers the lowest level of latency by immediately forwarding a packet
  7. 9. A one-to-many communication in a network
  8. 11. Frames with more than 1500 bytes of data
  9. 13. forward the frame out all ports except the incoming port
  10. 15. Protocol used to find the hardware address of a device given its IP address
  11. 17. 48-bit binary value, expressed using 12 hexadecimal values