Across
- 2. A clutch plate which is indexed into the clutch basket (outer hub) by tabs. Drive plate has friction material bonded to its surface. When clutch is engaged, drive plate transfers power to driven plate.
- 5. Part of clutch assembly containing drive plates. Primary drive gear engages teeth on the outside of the clutch basket.
- 6. clutch inner hub.
- 7. A clutch assembly that does not run in an oil bath.
- 11. Clutch engaged by centrifugal force as engine speeds up.
- 12. Uses a diaphragm or conical spring instead of coil springs to produce adequate pressure required for keeping the clutch in the engaged position.
- 13. A type of clutch that will transmit rotary motion in one direction only.
- 15. Round dish shaped piece of flat spring steel, used to force pressure plate against clutch disc in some clutches.
- 17. A metal housing that surrounds the flywheel and clutch assembly.
- 18. A clutch plate which is indexed onto the clutch inner hub by tabs or splines around its inside diameter. Driven plate is usually a plain plate (no friction material) and drives gearbox input shaft
- 19. Clutch utilizing cone shaped member that is forced into a cone shaped depression in the flywheel, or the other driving unit.
Down
- 1. Part of a clutch assembly providing pressure against the clutch disc or clutch plates.
- 3. A multiple plate clutch which runs in an oil bath (primary drive).
- 4. a Y shaped member into which is assembled the throw-out bearing.
- 8. Device used to connect and disconnect engine power to gearbox input shaft.
- 9. Part of the clutch assembly splined to transmission clutch or input shaft, faced with friction material.
- 10. Bearing operated by the clutch linkage used to disengage the clutch.
- 14. a mechanical device for transmitting torque between two shafts.
- 16. That part of the clutch which exerts pressure against the friction disc, it is mounted on and rotates with the flywheel.