Across
- 2. product used to help cure polyester resin
- 4. what should be less than 80% for correct environmental conditions
- 7. what level should be below 50ppm in the UK
- 11. a type of defect found in lamination
- 12. a type of roller used to consolidate 1st mat
- 13. type of gloves used in lamination
- 15. a type of contamination
- 17. what must you change for epoxy to speed up curing time
- 18. another name for Aramid
Down
- 1. a resin system requiring a hardener
- 3. what environmental condition must be continually monitored
- 5. a black fiber material
- 6. the first resin painted onto the mould usually having a colour
- 8. a medium strength resin
- 9. a type of core
- 10. type of lamination where resin is added at the end under vacuum
- 14. a smoking mix off curing resin
- 16. type of material where fiber's are laid in 2 directions