Across
- 4. is a framework consisting of two horizontal members joined together by a number of veritical and/or inclined members to form a series of triangles
- 5. Flanges are steel members that are identified by nominal depth in inches, and weight per foot
- 7. drawings show locations of the meter, distribution panel, switchgear, convenience outlets and special outlets
- 9. drawings show layout for the supply of hot and cold water, and for the sewage disposal system
- 10. drawings provide the necessary information on the location, alignment, and elevation of a structure and its principal parts in relation to the ground at the site
- 15. are statements that are provided to the general contractors to define the quality of work to be done and the materials to be used
- 17. this acronym is a form to fill out if there is a discrepancy in the plans
- 19. drawings show an object from multiple different views
- 22. is the relationship of the size or distance of an item on a drawing compared to the real life size of the time when an items size is reduced to fit on a particular sheet size
- 24. lines identify part of a structure that is not visible on the drawing
- 25. drawings provide information on the Heating, Ventilation and Air Conditioning in a building
- 26. lines identify the object of primary interest or the closest object
- 27. are used to help reduce clutter and simplify drawings, along with a table to explain the abbreviations
- 29. lines show the measured centre of and object
- 32. drawings are generally considered to be the drawings of steel, wood, concrete and other building materials
- 35. is the actual measurement of distances, elevations and directions on the earth’s surface
- 36. is the connection place where steel members are connected to other steel members
- 37. is a visual explanation of the symbols placed on a drawing
- 40. List (also called Bill of Materials) is a list of the materials that are required to build an item
- 42. lines establish the sizes of parts if a structure – may end in arrows, dots, or slashes at a termination line drawn perpendicular to the dimension line
- 43. drawings are the vertical views of a building, especially the outside walls
- 44. drawings are enlarged views of some special features of a building
Down
- 1. drawings are used to illustrate the design of a project
- 2. are traditionally printed drawings with white lines on a blue background
- 3. Block is placed on the drawing to record any changes in the drawing and includes a brief description of the change, the date, and who made the change
- 6. are steel members that are similar in shape to the letter L
- 8. lines are used to indicate where an imaginary cut is made through the object (2 words)
- 11. lines show where an object has been broken off to save space on the drawing
- 12. lines identify the location of a specific part of the drawing – used with words, abbreviations, symbols, or keynotes
- 13. is normally placed in the lower right corner of the drawing and usually include the company logo, project title, and the date the drawing was created (2 words)
- 14. drawings include information about motors. pumps and piping systems and piping equipment
- 16. lines show points of equal elevation
- 18. displays items as the eye sees them
- 20. drawings are architectural or working drawings used to represent a structure or system
- 21. of lines describes all the different types of lines used in a drawing
- 23. is a high-strength vertical structural member
- 28. tell what material is required for certain parts of the project
- 30. lines show land boundaries
- 31. allows a specific point on a drawing to be referenced or found
- 33. maps describe in detail the local features of the earth’s surface
- 34. is a high-strength horizontal load-bearing member
- 38. are steel member that are cut from a standard I-shape thus forming two T-Shapes
- 39. are steel members that are similar in shape to the letter C
- 41. A window ________ lists all the window types, frame sizes, frame finish and glazing information for all the windows in a building