Construction Technology 1

123456789101112131415161718
Across
  1. 3. Direct award of contract to the Contractor who have capabilities and experience after series of negotiation between Client and the Contractor is called ____________ tender
  2. 6. Concrete is a __________ material made from several readily available constituents (aggregates, sand, cement, water).
  3. 8. A type of curing method
  4. 10. Construction works above ground level
  5. 12. A process for concrete hardening by adding moisture to the concrete surface
  6. 13. An ___________ scaffold consists of a double row of standards, with each row parallel to the building.
  7. 14. These are lifting devices designed to raise materials by means of rope operation and move the load horizontally within their limitations of any particular machine.
  8. 16. Right to enter the Site, occupy and use the Site and carry out the specified Works is called site ___________
  9. 17. Dead load is the weight of the ___________ materials
  10. 18. Construction works below ground level
Down
  1. 1. __________ of concrete depends on water content, fineness of cement, and surface area of aggregates
  2. 2. Inviting offers from a limited number of registered Contractors, normally through Client’s personal contact, recommendation from Consultants or third parties known to the Client is called ______________ tender
  3. 4. ____________ is an element of risk
  4. 5. ____________ is a measure of the force per unit area (or force divided area)
  5. 7. Chemical added to speed up the hydration (hardening) of the concrete is called ____________
  6. 9. A _________ scaffold consists of a single row of standards, parallel to the face of the building and set as far away from it as is necessary to accommodate a platform of four or five boards wide, with the inner edge of the platform as close to the wall as is practicable.
  7. 11. Process of selecting a suitable and qualified Contractor for the project
  8. 15. _____________ loads are those loads due to temperature changes, construction eccentricities, shrinkage of structural materials, settlement of foundations, or other such loads