Across
- 4. The upper half of a two-part mould.
- 8. A non-metallic particle trapped in the metal, often considered a defect.
- 9. A high-temperature device used to melt metal.
- 10. The hollow space inside a mould.
- 12. A cleaning process using steel shot.
- 15. A specialist who studies metals, their properties, and their behaviour.
- 17. The lower half of a two-part mould.
- 18. A machine or device that throws sand at high speed to fill large moulds.
- 19. A replica used to create the mould cavity.
- 20. A process used to smooth the surface of castings.
- 21. The reduction in metal volume during cooling.
- 22. A factory where metal castings are produced.
Down
- 1. A machine that transports materials through a foundry.
- 2. The container that gives molten metal its final shape.
- 3. The process of shaking or vibrating a mould to compact sand.
- 5. A manufacturing process in which molten metal is poured into a mould.
- 6. Maintenance based on sensor data to prevent failures.
- 7. A machine that removes metallic contaminants from sand.
- 11. The process of shaking or vibrating a mould to compact sand.
- 13. The process of heating and cooling metal to improve its properties.
- 14. The metal frame that holds the mould.
- 16. The process in which liquid metal becomes solid.