Data Communications & Networks II

1. Acronym for Classless Inter-Domain Routing
4. Older network designs always placed the router at the ______ of the network.
9. UDP Protocol is ___________ technology.
10. Particular format of electrical pulses.
11. Implementing dynamic NAT automatically creates a __________ between your internal network and outside networks.
13. ATM stands for:
17. At the TCP/IP network access layer, the protocol data unit is called a ___________.
18. Filtering, flooding and transmitting frames is the function of a _____________.
20. A disadvantage of satellite communication is a ______ delay
23. Which harware device might be found in the access layer of the Cisco model?
25. PING stands for __________.
27. If multiple errors are detected in an ATM packet the packet is:
28. The TCP/IP Internet layer corresponds to the OSI ___ layer.

1. CSU stands for:
2. Bandwidth is typically represented in bits per ________.
3. Acronym for Wide Area Network
5. The inter-network processor that is an interface between two different or dissimilar networks.
6. MAN stands for:
7. An increasingly popular method of distributing network at home is the _ _ _ _.
8. The TCP/IP host-to-host layer corresponds to the OSI____ layer.
12. An example of a routed protocol would be ____.
14. At this layer, speed and latency are of the utmost concer...
15. A short range device used for ID cards, security devices and can replace UPC code.
16. The transmission of light pulses over glass fiber is called _________ signaling.
19. The first 48 bits of an Ethernet frame is the ________.
21. Another name for CIDR is:
22. TCP Protocol is ________ circuit technology.
24. At the TCP/IP host-to-host layer the protocol data unit is called a ____________.
25. At the TCP/IP internet layer the protocol data unit is called a __________.
26. A condition when a communications link, path or network experiences a load that exceeds it's capacity is ___________.